Front of vest
Front of vest
Close up of front
Close up of back
The Shisha Mirrors
India design
India 01 design
India 02 design
Notions for Shisha Mirrors
india design.
3 x Shisha mirrors - size No. 8.
adhesive tape.
scraps of fabric.
Instructions
1. Commence sewing the india design until colour No. 6 is reached.
2. Remove the hoop from your machine. DO NOT UNDO THE HOOP.
3. Carefully cut the centre of the design using a sharp pair of scissors. The tension in your hoop will assist in this procedure. Refer to step No. 1.
4. Place the fabric face down on a flat surface to access the rear of the design.
5. Position the Shisha mirror, face down to cover the hole made in your design.
6. Stick the Shisha mirror firmly in place. I used sticky tape. Refer to step No. 2, shown below.
7. Cover the Shisha mirror with a scrap of fabric. Securely pin the fabric in place. Refer to step No. 3
8. Return the hoop to your machine.
9. Select colour No. 6.
10. Securely stitch the Shisha mirror in place behind the design. I stitched round the mirror twice.
| | | ||
Step 1 | Step 2 | Step 3 |
Template for the outside border | Close up of the Decorative Stitches from your machine |