delicious1


Delicious

Released on the 23rd October 2017

23 designs included in the Delicious Machine Embroidery design set.

The Delicious design is suitable for a 5 x 7 inch or a 180mm x 130mm hoop.

The Delicious deisgn is available in ARTV3, ARTV4, ARTV5, ARTV6, ARTV7, DST, EXP, HUS, JEF, PES, VIP, VP3 and XXX.

The colour chart and instructions are included in the design set.

View the Delicious Machine Embroidery design set

 

Country Chic Door Hanger

 

Country Chic Machine Embroidery Designs

 

What you need to make the door hanger

  • ½ meter or ½ yard of plain fabric

  • ½ meter or ½ yard of floral fabric

  • 2 meters or 2 yards of ribbon

  • 3 large beads

  • Bag of stuffing

  • Stabilizer Stitch and Tear

  • Thin wadding

To stabilize the fabric I used the following

  • Thin wadding and below the wadding I put the Stitch and Tear

 

Country Chic Machine Embroidery Designs

 

Stitch out Country Chic_08 I used a pretty Liberty cotton fabric for the roof

 

Country Chic Machine Embroidery Designs

 

Stitch out Country Chic_03 I used a fine cotton with a faded dark pink stripe fabric

 

instcountrychic3

 

Stitch in a straight stitch around the house and roof panel, this will mark the seam for you to cut out

 

Country Chic Machine Embroidery Designs

 

Lay under the roof and house panel the fabric you would like for the backing.

 

Country Chic Machine Embroidery Designs

 

Cut around the house, roof panel and backing fabric where you had straight stitched

 

Country Chic Machine Embroidery Designs

 

Country Chic Machine Embroidery Designs

 

Stitch the roof and house together then iron the seams flat

 

Country Chic Machine Embroidery Designs

 

Stitch the house to the back leaving the base for stuffing

Fill the house with stuffing

Stitch the base, I just hand stitched

 

Country Chic Machine Embroidery Designs

 

Stitch out Country Chic_05

Straight stitch around the heart for you to follow the seam

 

Country Chic Machine Embroidery Designs

 

Using the same fabric for the front and back cut out the heart following your stitches for the seam

 

Country Chic Machine Embroidery Designs

 

Stitch the hearts together leaving enough room for you to stuff the hearts

 

Country Chic Machine Embroidery Designs

 

Make a bow and stitch the bow to the base of the house

 

Country Chic Machine Embroidery Designs

 

I stitched on these large pearl beads, these are old pearl beads from a necklace my Mother-in-Law once owned, you can use whatever you have around the house or try searching dollar shops or Vinnies or one of those places near you

Using the same ribbon as the bow at the base of the house and hand stitch the hearts on the ribbon

Stitch the ribbon that has the hearts to the base of the house

 

Country Chic Machine Embroidery Designs

 

Stitch a loop using the same ribbon and a bead onto the top of the roof

 

 

 

 

Country Chic Bag Holder

 

Country Chic Machine Embroidery Designs

 

What you need to make the plastic bag holder

  • ½ meter or ½ yard of cotton fabric for the house panel

  • ½ meter or ½ yard of striped fabric

  • Elastic 36 cm or 14 inches in length

  • Ribbon for a bow

To stabilize the fabric I used the following

  • Thin wadding and below the wadding I put the Stitch and Tear

 

Country Chic Machine Embroidery Designs

 

Stitch out either Country Chic_01 or Country Chic_09 depending on the size of the hoop you have

 

Country Chic Machine Embroidery Designs

 

Cut as close as you can to the satin stitch border, once you have cut all around the satin stitching with your scissors leave enough of the fabric where the straight stitches are so at a later time you can stitch a satin stitch.

 

Country Chic Machine Embroidery Designs

 

Cut the striped fabric 65cm or 14 inches wide by 65cm or 14 inches long

 

Country Chic Machine Embroidery Designs

 

hem both the top and bottom of the striped fabric

 

Country Chic Machine Embroidery Designs

 

Fold the fabric in half-length ways, to the right of your fold find the centre and Stitch Country Chic_05 on the striped fabric

 

Country Chic Machine Embroidery Designs

 

Cut elastic 36 cm or 14 inches long and 1 cm or 1 inch wide, I really do not think that it would matter how wide the elastic is

 

Country Chic Machine Embroidery Designs

 

Using a zigzag stitch sew your elastic close to the bottom of the fabric

 

Country Chic Machine Embroidery Designs

 

Country Chic Machine Embroidery Designs

 

Stitch the side of the striped fabric and then iron the seams

 

Country Chic Machine Embroidery Designs

 

At the top on both sides of the striped fabric find the centre

 

Country Chic Machine Embroidery Designs

 

You can either pleat the striped fabric or gather which ever you prefer to be the same size as the green panel

 

Country Chic Machine Embroidery Designs

 

Stitch the gathers or pleats down

 

Country Chic Machine Embroidery Designs

 

Front panel

 

Country Chic Machine Embroidery Designs

 

Back panel

 

Insert into the green panel the striped fabric and zigzag stitch the striped fabric to the green panel

 

Country Chic Machine Embroidery Designs

 

 

Cut away the excess fabric from the zigzag stitches, satin stitch over the zigzag stitches, I satin stitched a couple of times


I had a velvet ribbon similar colour to the flowers and made a bow and hand stitched the bow in the centre, I feel this just gives the work a lovely finished look

 

 

 

 

Harvest Moon Machine Embroidery Designs

 

Harvest Moon

Released on the 12th October 2017

5 designs included in the Harvest Moon Machine Embroidery design set.

The Harvest Moon design is suitable for a 6 x 10 inch or a 240mm x 150mm hoop.

The Harvest Moon deisgn is available in ARTV3, ARTV4, ARTV5, ARTV6, ARTV7, DST, EXP, HUS, JEF, PES, VIP, VP3 and XXX.

The colour chart and instructions are included in the design set.

View the Harvest Moon Machine Embroidery design set

The Roses Machine Embroidery Designs

 

The Roses

Released on the 22nd September 2017

9 designs included in The Roses Machine Embroidery design set.

The Roses design is suitable for a 6 x 10 inch or a 240mm x 150mm hoop.

The Roses deisgn is available in ARTV3, ARTV4, ARTV5, ARTV6, ARTV7, DST, EXP, HUS, JEF, PES, VIP, VP3 and XXX.

The colour chart is included in the design set.

View The Roses Machine Embroidery design set

Saki Machine Embroidery Designs

 

Saki

Released on the 26th August 2017

8 designs included in the Saki Machine Embroidery design set.

The Saki design is suitable for a 6 x 10 inch or a 240mm x 150mm hoop.

The Saki deisgn is available in ARTV3, ARTV4, ARTV5, ARTV6, ARTV7, DST, EXP, HUS, JEF, PES, VIP, VP3 and XXX.

The colour chart is included in the design set.

View the Saki Machine Embroidery design set