Harmony Black Bag

 

Harmony Machine Embroidery Designs

 

Harmony Machine Embroidery Designs

 

Stitch out Harmony_08 This is the front of the bag

 

Harmony Machine Embroidery Designs

 

Stitch around each of the panels for your seam allowance, I find this is an easy way of marking the seam allowance especially on a dark fabric

 

Harmony Machine Embroidery Designs

 

Stitch out the following

  • Harmony_04_Back
  • Harmony_05_Side, stitch two
  • Harmony_06_Base
  • Harmony_13A_Flap
  • Harmony_13_Flap

 

Harmony Machine Embroidery Designs

 

Cut out each panel where you have marked for seam allowance

Using your panels that you have just cut for the lining of the bag

I like to lay out each piece of the bag to understand how I am going to stitch the bag together

 

Harmony Machine Embroidery Designs

 

Stitch the front to the base

Stitch the base to the back

Stitch the back to the design Harmony_03A_Flap

 

Harmony Machine Embroidery Designs

 

Stitch the sides to the front

 

Harmony Machine Embroidery Designs

 

Once you have stitched both sides to the front and back panels, stitch the design Harmony_13A_Flap to the back of the bag.

 

Harmony Machine Embroidery Designs

 

Stitch the design Harmony_13_Flap to the Harmony_13A_Flap

 

Harmony Machine Embroidery Designs

 

Stitch the following lining together

  • Front
  • Back
  • The two sides
  • Base

 

Harmony Machine Embroidery Designs

 

At the top of the lining stitch in your seam allowance

 

Harmony Machine Embroidery Designs

 

Stitch the following lining together

Harmony flap front and Harmony flap rectangle

 

Harmony Machine Embroidery Designs

 

Stitch the two lining flaps to the two black flaps

 

Harmony Machine Embroidery Designs

 

Cut away any excess fabric and snip using sharp scissors on the curve as you can see in the photograph

Glue and stitch in your bag strap to the side panels

Insert your magnetic studs to the flap and front panels (I forgot to do this part)

 

Harmony Machine Embroidery Designs

 

Pin the front and side lining to your bag

Stitch the front and side lining together, leaving the back of the lining

 

Harmony Machine Embroidery Designs

 

Hand stitch the rectangle flap to the back of the lining

 

Harmony Machine Embroidery Designs

 

I kept many of mothers clip on earrings or if you do not have any you can purchase from the two dollar shops , stitch the clip on earring to a tassel and hand sew on the pointed front flap

 

Harmony Machine Embroidery Designs

 

Earring and tassel stitched to the pointed end of the front flap

 

 

 

Harmony Aqua Crush

 

Harmony Machine Embroidery Designs

 

I like to make these for friends especially those who travel, these holders are great to throw odds and ends in rather than have all over the hotel room

 

Harmony Machine Embroidery Designs

 

Stitch out Harmony_09

The size of the holder is 35 wide x 28 cm length or 13.5 wide x 11 inches length

Stitch using a running stitch on your machine for both the front and back

 

Harmony Machine Embroidery Designs

 

Photograph showing you a close up of the running stitch

 

Harmony Machine Embroidery Designs

 

Mark on each side front and back 5 x 5 cm or 2 x 2 inches

 

Harmony Machine Embroidery Designs

 

Before stitching match up the front and back seam, once you have matched the seams pin and then stitch across as you can see in the photo above

 

Harmony Machine Embroidery Designs

 

This photograph showing you the inside of the holder the two seams front and back joining

 

Harmony Machine Embroidery Designs

 

Cut what I call ears off so there will not be any bulk

 

Harmony Machine Embroidery Designs

 

Make the lining the same width and length

Follow instructions No. 3 to No. 6

 

Harmony Machine Embroidery Designs

 

I added to the embroidery and the ends of the straight stitch those glue on crystals

 

Harmony Machine Embroidery Designs

 

I had some gold cording and stitched it on the holder before I stitched the lining to the holder

While in India a couple of years ago I purchased many different types of haberdashery most were very Bollywood those, to give the holder that Bollywood look I added the dingle dangles, I think they look great on the holder, I stitched them on and then added a bit more glitz with the glued crystals that I had used on the rest of the holder

 

  

Machine Embroidery Designs

 Latest Releases

 

Folklore Machine Embroidery Designs

Released on the 25th June 2019

 

 Folklore Machine Embroidery Designs by StitchingArt

  

6 designs included in the Folklore machine embroidery design set.

The Folklore design is suitable for a 6 x 10 inch or 240mm x 150mm hoop.

The Folklore design is available in DST, EMB, EXP, HUS, JEF, PES, VIP, VP3 and XXX.

The colour chart is included in the design set

As I am now digitizing with Wilcom embroidery software (which is a commercial software) we are unable to convert files to ART format. Bernina embroidery machines will now need to purchase designs in EMB or EXP format. Sorry for the inconvenience.

View the Folklore Machine Embroidery Designs

Mayil Machine Embroidery Designs

 
Mayil Machine Embroidery Designs

 Released on the 28th May 2019

6 designs included in the Mayil machine embroidery design set.

The Mayil design is suitable for a 14 x 8, 14 x 7 or 360mm x 200mm, 360mm x 150mm hoop.

The Mayil design is available in DST, EMB, EXP, HUS, JEF, PES, VIP, VP3 and XXX.

The colour chart is included in the design set

As I am now digitizing with Wilcom embroidery software (which is a commercial software) we are unable to convert files to ART format. Bernina embroidery machines will now need to purchase designs in EMB or EXP format. Sorry for the inconvenience.

View the Mayil Machine Embroidery Designs

 

springoflife4

 

Spring of Life Machine Embroidery Designs

 Released on the 27th April 2019

9 designs included in the Spring of Life machine embroidery design set.

The Spring of Life design is suitable for a 5 x 7, 6 x 10, 8 x 12 inch or 180mm x 130mm, 240mm x 150mm and 360mm x 200mm hoop.

The Spring of Life design is available in DST, EMB, EXP, HUS, JEF, PES, VIP, VP3 and XXX.

The colour chart and instructions are included in the design set

As I am now digitizing with Wilcom embroidery software (which is a commercial software) we are unable to convert files to ART format. Bernina embroidery machines will now need to purchase designs in EMB or EXP format. Sorry for the inconvenience.

 View the Spring of Life Machine Embroidery Designs

 

 

Wild and Free Machine Embroidery Designs

 

Wild and Free Machine Embroidery Designs

 Released on the 2nd February 2019

6 designs included in the Wild and Free machine embroidery design set.

The Wild and Free design is suitable for a 6 x 10 inch or 240mm x 150mm hoop.

The Wild and Free design is available in DST, EMB, EXP, HUS, JEF, PES, VIP, VP3 and XXX.

The colour chart and instructions are included in the design set

As I am now digitizing with Wilcom embroidery software (which is a commercial software) we are unable to convert files to ART format. Bernina embroidery machines will now need to purchase designs in EMB or EXP format. Sorry for the inconvenience.

 View the Wild and Free Machine Embroidery Designs