Instructions for Cream Silk Pillow

Two Exotic designs, exotic01 and exotic03 were combined and the result is shown below

 

 

 

 

Stitch out the exotic01 design.
 
Remove hoop and reposition it below and slightly to the right hand side of the exotic01 design.
 
Stitch out the exotice03 design in the selected position.
 
The two designs look better when combined if you do not have them positioned directly under one another.
 
 Instructions for Ivory Silk Pillow -

Combining exotic01 and exotic03 Designs

 

Two Exotic designs, exotic01 and exotic03 were combined and the result is shown below

 
Stitch out the exotic01 design.
 
Remove hoop and reposition it below and slightly to the right hand side of the exotic01 design.
 
Stitch out the exotice03 design in the selected position.

 
 

Water Design Instructions

The water design was originally created to decorate a lovely, co-ordinated set of pillows. After having created the design, I began to realise that it had great possibilities in decorating clothes and matching accessories. It could also be used as a striking decoration for an interesting wall hanging.
 
The photo below is of my wall hanging, which I framed.
 

The two photographs shown below to the right show my water pillow set.

 

The water design was positioned centrally and sewn once on the first pillow to create an attractive monogram. It is shown below.

 

The water design was used repeatedly on the pillow shown below, to the right to create an appealing all over pattern.

 

Instructions for Black Swan Stool Cover

Two Exotic designs, blswan02 and blswan07 were combined and the result is shown below.

 

Locate and mark the centre of the fabric. It is important to commence sewing in the middle
of the fabric, as any errors made while sewing the parallel lines will not be as obvious as if you
started at one end of the fabric and stitched to the other.
 
Sew continuous lines using stitch No. 02 L=0.30 W=3.0 at 3/4inch or 2cm apart in black Madeira thread
 
Sew continuous lines using stitch No. 126 L=16 W=6.0 in the centre, between each black satin stitch in tan Madeira thread.
 
On either side of the feathered leaf, sew stitch No. 01 (triple straight stitch) L=3.0 in gold Madeira thread.
 
Stitch the blswan02 design on a separate piece of white silk fabric.
 
Locate the centre of your stool cover.
 
Centre the blswan02 design on your cover, then appliqué using satin stitch No. 02 L=.30 W=4.0
 
Stitch the blswan07 design on four separate pieces of white silk fabric.
 
Position the four blswan07 patterns, as shown in the photographs, below
 

Sew the four appliqué using satin stitch No. 02 L=.30 W=4.0.

  

Machine Embroidery Designs

 Latest Releases

 

Folklore Machine Embroidery Designs

Released on the 25th June 2019

 

 Folklore Machine Embroidery Designs by StitchingArt

  

6 designs included in the Folklore machine embroidery design set.

The Folklore design is suitable for a 6 x 10 inch or 240mm x 150mm hoop.

The Folklore design is available in DST, EMB, EXP, HUS, JEF, PES, VIP, VP3 and XXX.

The colour chart is included in the design set

As I am now digitizing with Wilcom embroidery software (which is a commercial software) we are unable to convert files to ART format. Bernina embroidery machines will now need to purchase designs in EMB or EXP format. Sorry for the inconvenience.

View the Folklore Machine Embroidery Designs

Mayil Machine Embroidery Designs

 
Mayil Machine Embroidery Designs

 Released on the 28th May 2019

6 designs included in the Mayil machine embroidery design set.

The Mayil design is suitable for a 14 x 8, 14 x 7 or 360mm x 200mm, 360mm x 150mm hoop.

The Mayil design is available in DST, EMB, EXP, HUS, JEF, PES, VIP, VP3 and XXX.

The colour chart is included in the design set

As I am now digitizing with Wilcom embroidery software (which is a commercial software) we are unable to convert files to ART format. Bernina embroidery machines will now need to purchase designs in EMB or EXP format. Sorry for the inconvenience.

View the Mayil Machine Embroidery Designs

 

springoflife4

 

Spring of Life Machine Embroidery Designs

 Released on the 27th April 2019

9 designs included in the Spring of Life machine embroidery design set.

The Spring of Life design is suitable for a 5 x 7, 6 x 10, 8 x 12 inch or 180mm x 130mm, 240mm x 150mm and 360mm x 200mm hoop.

The Spring of Life design is available in DST, EMB, EXP, HUS, JEF, PES, VIP, VP3 and XXX.

The colour chart and instructions are included in the design set

As I am now digitizing with Wilcom embroidery software (which is a commercial software) we are unable to convert files to ART format. Bernina embroidery machines will now need to purchase designs in EMB or EXP format. Sorry for the inconvenience.

 View the Spring of Life Machine Embroidery Designs

 

 

Wild and Free Machine Embroidery Designs

 

Wild and Free Machine Embroidery Designs

 Released on the 2nd February 2019

6 designs included in the Wild and Free machine embroidery design set.

The Wild and Free design is suitable for a 6 x 10 inch or 240mm x 150mm hoop.

The Wild and Free design is available in DST, EMB, EXP, HUS, JEF, PES, VIP, VP3 and XXX.

The colour chart and instructions are included in the design set

As I am now digitizing with Wilcom embroidery software (which is a commercial software) we are unable to convert files to ART format. Bernina embroidery machines will now need to purchase designs in EMB or EXP format. Sorry for the inconvenience.

 View the Wild and Free Machine Embroidery Designs