Tudor Bag

I stitched 2 panels of each Tudor12 and Tudor12a to make the Tudor bag. Refer to 16,17, 18 and 19 photographs for the instructions for putting the Tudor bag together

The above photo shows the type of pearl binding used on the bag. I stitched the pearl binding around Tudor12 panel.  


 

Tudor12 and Tudor12a panels stitched together

Many believe the colour's that were used in the Elizabethan I period were dull colour's, the reason for the dull colour's was due to fading of the fabrics and embroidery threads.

The colour's used during the early period were very bright to the point of being garish, as the silk was being shipped from China through the trade routes not through the silk road, due to the Mongol invasions.

Fine examples of the embroidery of that time is to look at photos of the stump work boxes that were produced by hand, not the out side of the boxes as the colour's have faded over time but the inside of the stump work boxes, there you will see the beautiful silk thread and the true colour's of the out side of the boxes

 

Combining all the Tudor bags panels together
 

 

Completed stitched panels
 

Close up of the pearl binding on the bag
 

Combining Tudor12d for the strip to put the rope for the handles
 

Template of panels for the lining of the bag
 

Cut out 4 panels for the lining
 

Cut out lining for the strip. I put a row of pearl binding at the top of the strip

 

10 

Stitch the lining and the strip together as shown in the photograph. Then fold the lining over and stitch a straight stitch under the decorative stitches, this is for the rope that you will be threading through at a later stage. I also decorated with drop pearls
 

11 

This is how the strip should look before you stitch the strip to the bag
 

12 

The strip stitched to the top of the bag
 

 

13 

Iron over the raw edge of the lining and put a simple decorative stitch over the folded edge
 

14 

Pin the strip to the lining
 

15 

Stitch by hand the two lining together
 

16 

Stitch Tudor02 (if you are making the floral bag use Tudor12a) Stitch all the circles out.

The machine will come to a stop for you to be able to take the hoop away from the machine

 

 

17 

  1. Take the hoop away from the machine and cut the fabric from each circle as shown in the photograph.
  2. Using either silk or a very fine fabric cut out 12 squares 2.5 inch or 6cm square. Have the silk squares beside you at the machine
  3. With the first hole poke the silk up through the hole using your finger and then gently put your hoop back into your machine
  4. Start the first colour using the same colour you used for all the holes, I decided on black thread.
  5. This is a bit tricky I used either a plastic stick or a bamboo stick to hold the silk out of the way of the machine going around the hole. I would have my finger on the stop button at all times
  6. After each hole the machine will stop so you can take your hoop out of the machine and put the silk in the hole
 

18 

Mark with your chalk or marking pen the seam allowance from the outer border 

 

 

19 

An easy way of marking your fabric for a seam allowance is to use the attachment as seen in the photograph to the left
 

20 

On this bag I used a beautiful velvet binding
 
 

   

21                                        22 

 

23 

As you can see in the photo number 24 I removed the extra strip off the bag as you can see in the photo above, I did not like it, it looked a bit strange. Never be frightened of using bold lining as that can add to the over all look of your work and can look very dramatic.
 
 

     

24                                            25 

 

26 

Pull the cord through starting at one of the holes in the strip and bringing the cord all the way around to where you started, bring the cord through. With the other hole in the strip do the same.
 
 

     

27                                                28 

  
 

    

29                                                    30 

 
  Tudor Foot Stool
As you can see our bed is rather high that is the reason for the foot stool
 
Purchase a foot stool from your local folk art shop. Mark the centre of the stool
 
Mark the centre's to the sides of the foot stool

  
Mark the centre of your design and also the sides of the fabric with your designs on it

Spray glue to the wadding then place the wadding to the foot stool

Match the fabric lines with the stool lines so you can get the exact centre

Staple the wadding and fabric to the stool

 
 
  I purchased a few weeks ago a product from Punch with Judy I saw it at the Stitches and Craft show in Sydney. It is a pleat maker, you will now see a lot more of my work with pleats as I just love the finished look using this product, this was the first time I used the pleat maker and cannot believe how well the pleating turned out....If you are interested click on the URL below. I am not affiliated with this company at all, just love the pleater :)

http://www.punchwithjudy.com.au/

 
 
Before the pleating I made a hem top and bottom

I glued the pleated fabric to the stool.


 
     

  

Machine Embroidery Designs

 Latest Releases

 

Folklore Machine Embroidery Designs

Released on the 25th June 2019

 

 Folklore Machine Embroidery Designs by StitchingArt

  

6 designs included in the Folklore machine embroidery design set.

The Folklore design is suitable for a 6 x 10 inch or 240mm x 150mm hoop.

The Folklore design is available in DST, EMB, EXP, HUS, JEF, PES, VIP, VP3 and XXX.

The colour chart is included in the design set

As I am now digitizing with Wilcom embroidery software (which is a commercial software) we are unable to convert files to ART format. Bernina embroidery machines will now need to purchase designs in EMB or EXP format. Sorry for the inconvenience.

View the Folklore Machine Embroidery Designs

Mayil Machine Embroidery Designs

 
Mayil Machine Embroidery Designs

 Released on the 28th May 2019

6 designs included in the Mayil machine embroidery design set.

The Mayil design is suitable for a 14 x 8, 14 x 7 or 360mm x 200mm, 360mm x 150mm hoop.

The Mayil design is available in DST, EMB, EXP, HUS, JEF, PES, VIP, VP3 and XXX.

The colour chart is included in the design set

As I am now digitizing with Wilcom embroidery software (which is a commercial software) we are unable to convert files to ART format. Bernina embroidery machines will now need to purchase designs in EMB or EXP format. Sorry for the inconvenience.

View the Mayil Machine Embroidery Designs

 

springoflife4

 

Spring of Life Machine Embroidery Designs

 Released on the 27th April 2019

9 designs included in the Spring of Life machine embroidery design set.

The Spring of Life design is suitable for a 5 x 7, 6 x 10, 8 x 12 inch or 180mm x 130mm, 240mm x 150mm and 360mm x 200mm hoop.

The Spring of Life design is available in DST, EMB, EXP, HUS, JEF, PES, VIP, VP3 and XXX.

The colour chart and instructions are included in the design set

As I am now digitizing with Wilcom embroidery software (which is a commercial software) we are unable to convert files to ART format. Bernina embroidery machines will now need to purchase designs in EMB or EXP format. Sorry for the inconvenience.

 View the Spring of Life Machine Embroidery Designs

 

 

Wild and Free Machine Embroidery Designs

 

Wild and Free Machine Embroidery Designs

 Released on the 2nd February 2019

6 designs included in the Wild and Free machine embroidery design set.

The Wild and Free design is suitable for a 6 x 10 inch or 240mm x 150mm hoop.

The Wild and Free design is available in DST, EMB, EXP, HUS, JEF, PES, VIP, VP3 and XXX.

The colour chart and instructions are included in the design set

As I am now digitizing with Wilcom embroidery software (which is a commercial software) we are unable to convert files to ART format. Bernina embroidery machines will now need to purchase designs in EMB or EXP format. Sorry for the inconvenience.

 View the Wild and Free Machine Embroidery Designs