0

 

Measurements of Christmas tree

  • 100 cm wide from the base
  • 90cm the length

 

Notions

  • Lime green felt 2 meters or 2 yards
  • Brown fabric or brown tartan for the trunk of the tree 41 cm wide x 17 cm length
  • Stitch out the following Advent_01 to Advent_25
  • 2 gold tasselsGold star for the top of the Christmas tree
  • 25 yummy chocolates and lollies to put in the pockets

Once you have stitched out all the designs for the Advent calendar:

  • Mark the centre of the green felt using a marking pen.
  • Start with Advent_01 pocket at the top and pin the No. 01 down in the centre.
  • Stitch using a zigzag stitch to all three sides (do not stitch the top), as you need to put the Chocolates in the pockets
  • The next row, stitch down Advent_02 and Advent_03
  • The next row, stitch down Advent_04, Advent_05 and Advent_06
  • The next row, stitch down Advent_07, Advent_08, Advent_09 and Advent_10
  • The next row, stitch down Advent_11, Advent_12, Advent_13 and Advent_14
  • The next row, stitch down Advent _15, Advent _16, Advent_17, Advent_18 and Advent_19
  • The next row, stitch down Advent_20, Advent_21, Advent_22, Advent_23, Advent_24 and Advent_25

 

1

 

Once you have stitched all the Advent pockets onto the green felt, mark a triangle and cut out

 

3

 

In gold metallic thread zigzag around the triangle. The felt that I had purchased was very thin so I cut out another exact triangle and zigzagged stitch the felt to the back of the tree in gold metallic thread.

 

4

 

Stitch the trunk to the base

 

5

 

This is a gold Christmas ornament for a Christmas tree decoration which looks lovely stitched to the felt

 

6

 

To keep the gold metallic theme, hand stitch two gold tassels at each end of the base of the Christmas tree.

  

Machine Embroidery Designs

 Latest Releases

 

Wild and Free Machine Embroidery Designs

Released on the 2nd February 2019

 

 Wild and Free Machine Embroidery Designs

  

6 designs included in the Wild and Free machine embroidery design set.

The Wild and Free design is suitable for a 6 x 10 inch or 240mm x 150mm hoop.

The Wild and Free design is available in DST, EMB, EXP, HUS, JEF, PES, VIP, VP3 and XXX.

The colour chart and instructions are included in the design set

As I am now digitizing with Wilcom embroidery software (which is a commercial software) we are unable to convert files to ART format. Bernina embroidery machines will now need to purchase designs in EMB or EXP format. Sorry for the inconvenience.

 View the Wild and Free Machine Embroidery Designs

Contemporary Chic Machine Embroidery Designs by StitchingArt

 
Contemporary Chic Machine Embroidery Designs

 Released on the 4th December 2018

8 designs included in the Contemporary Chic machine embroidery design set.

The Contemporary Chic design is suitable for a 5 x 7 or 180mm x 130mm hoop.

The Contemporary Chic design is available in DST, EMB, EXP, HUS, JEF, PES, VIP, VP3 and XXX.

The colour chart is included in the design set

As I am now digitizing with Wilcom embroidery software (which is a commercial software) we are unable to convert files to ART format. Bernina embroidery machines will now need to purchase designs in EMB or EXP format. Sorry for the inconvenience.

 View the Contemporary Chic Machine Embroidery Designs

 

 

New York Machine Embroidery Designs

 

New York Machine Embroidery Designs

 Released on the 11th November 2018

 13 designs included in the New York machine embroidery design set.

The New York design is suitable for a 5 x 7 or 180mm x 130mm hoop.

The New York design is available in DST, EXP, HUS, JEF, PES, VIP, VP3 and XXX.

The colour chart and instructions are included in the design set

As I am now digitizing with Wilcom embroidery software (which is a commercial software) we are unable to convert files to ART format. Bernina embroidery machines will now need to purchase designs in EXP format. Sorry for the inconvenience.

View the New York Machine Embroidery Designs

 

 

 

Crinoline Lady Machine Embroidery Designs

 

Crinoline Lady Machine Embroidery Designs

 Released on the 4th November 2018

1 design included in the Crinoline Lady machine embroidery design set.

The Crinoline Lady design is suitable for a 6 x 10 inch or 240mm x 150mm hoop.

The Crinoline Lady design is available in DST, EMB, EXP, HUS, JEF, PES, VIP, VP3 and XXX.

The colour chart is included in the design set

As I am now digitizing with Wilcom embroidery software (which is a commercial software) we are unable to convert files to ART format. Bernina embroidery machines will now need to purchase designs in EMB or EXP format. Sorry for the inconvenience.

View the Crinoline Lady Machine Embroidery Design