×

Error

[JS Easy Social Icons] Alledia framework not found

 

 

 

 

Instructions for the Mississippi River cushion

 

 

 

Notions

a) 3 New Orleans designs ("willow01", "mississippi_steamer" and "melanie").
b) Print outs of the abovementioned 3 New Orleans designs.
c) Dusty pink coloured silk fabric - 30.0 x 22.0 inches (76.0 x 56.0 cms).
d) Pellum and tear-away backing.
e) Large sheet of paper.
f) Ruler
g) Chalk or soft pencil
h) Dusty pink coloured decorative upholstery rope - 52.0 inches (132.0 cms).

 


 

Print out the four designs. Ensure that all the prints are actual size.


 

Determine and mark the centre of each of the three print-outs.


 

Carefully cut around each of the three printed designs, so that each of the designs can be positioned on your fabric in the selected positions.


 

Lay out and position each of the three designs on a large piece of paper in the positions which you finally desire to stitch out on your fabric.


 

The three designs look better and will have more spatial orientation when combined if you do not have them positioned directly beside one another. Ensure that the "melanie" design is positioned centrally, below the other two designs and that it slightly overlaps the leaves of the "willow01" design on the left hand side and the stern of the "mississippi_steamer" design on the right


 

Glue or tape each of the three printed designs onto your large piece of paper.


 

Overelay, position and pin your large sheet of paper over your fabric.


 

Carefully, using a very soft pencil, mark the centre points for each of the three designs on your fabric, through your printed designs.


 

Pin the pellum and the tear away backing onto the fabric.


 

Commence by stitching out the "willow01" design on the top left hand side.


 

Remove hoop and reposition it to the top right hand side of your fabric.


 

Next, stitch out the "mississippi_steamer" design in the selected position.


 

Remove hoop and reposition it centrally, below and between the "willow01"


 

Don't forget the overlay of this design - Refer to #5, above.


 

Stitch out the "melanie" design in the selected position.


 

Just let your own imagination run riot. Use the decorative stitches of your machine to create any further water and wave motion around and about the designs.


 

 

 

 

Instructions for the Garden District Cushion

 

 

Notions

a) 1 New Orleans designs ("garden_district").
b) Dusty pink coloured silk fabric - 24.0 x 28.0 inches (61.0 x 71.0 cms).

c) Dusty pink coloured silk fabric - 24.0 x 28.0 inches (61.0 x 71.0 cms).
d) Strip of good quality silk remnant - 43.0 x 1.25 inches (110.0 x 3.0 cms)
e) Dusty pink coloured decorative upholstery rope - 52.0 inches (132.0 cms).

 


 

 

Carefully, using a very soft pencil, mark the centre point of the design on your fabric.


 

Pin the pellum and the tear away backing onto the fabric.


 

Stitch out the "garden_district" design in the centre of your fabric.


 

Cut the remnant strip of fabric to size - 2 lengths of 10.0 inch and 2 lengths of 11.5 inches (29.0 cms)


 

Iron the 4 strips of fabric onto vlisofix backings


 

Trim the four strips to create an attractive rectangular border frame around the design . Please refer to the photos provided.


 

Iron the 4 strips of fabric onto the face of the cushion to form the frame.


 

Sew around all the edges of the border frame using a small satin stitch in a dark dusty pink coloured thread.



Using a decorative stitch from your machine, sew around the outside edge of the border frame in a dark dusty pink coloured thread.

 

 

 

 

 


 

 

 

 

 

Instructions for the Melanie Cushion

 

 

Notions

a) 1 New Orleans designs ("melanie") and ("Fun")
b) Quality white coloured silk fabric - 24.0 x 22.0 inches (61.0 x 56.0 cms).

c) Pellum and tear-away backing.

d) Strip of good quality white silk lace - 46.0 x 1.0 inches (117.0 x 2.5 cms).

 


 

 

Strip of good quality white silk lace - 46.0 x 1.0 inches (117.0 x 2.5 cms).


 

Determine and mark the centre of each of the three print-outs.


 

Carefully cut around each of the three printed designs, so that each of the designs can be positioned on your fabric in the selected positions.


 

Lay out and position each of the three designs on a large piece of paper in the positions which you finally desire to stitch out on your fabric.


 

The three designs look better and will have more spatial orientation when combined if you do not have them positioned directly beside one another. Ensure that the "melanie" design is positioned centrally, below the other two designs and that it slightly overlaps the latticework of both the "fun" designs Please refer to the photos provided.


 

Glue or tape each of the three printed designs onto your large piece of paper.


 

Overelay, position and pin your large sheet of paper over your fabric.


 

Carefully, using a very soft pencil, mark the centre points for each of the three designs on your fabric, through your printed designs.


 

Pin the pellum and the tear away backing onto the fabric.


 

Commence by stitching out one of the "fun" designs on the left hand side.


 

Remove hoop and reposition it to the right hand side of your fabric


 

Next, stitch out the second "fun" design in the selected position.


 

Remove hoop and reposition it centrally, below and between both "fun" designs. Please refer to the photos provided for exact positioning.


 

Don't forget the overlay of this design - Refer to #5, above.


 

Stitch out the "melanie" design in the selected position.


 

Complete the assembly and border decoration of the cushion

 

 

 

 

 






 
Instructions for New Orleans shirt

 

 

New Orleans designs, "fence", "rose_tree" and "melanie"


 

Print out, position and glue the three designs on a large sheet of paper


 

Overelay, position and pin your large sheet of paper over your fabric...


 

Mark the centre points for each of the three designs on your fabric.


 

Pin the pellum and the tear away backing onto the fabric.



5. Stitch out the designs in sequence, allowing for the overlaying of the "rose_tree" designs on the "fence" design and, in turn, the overlaying of the "melanie" design on the "fence" design.
Please refer to the photos provided, below.

 

 

 

 

 

 


 

 

 

  

Machine Embroidery Designs

 Latest Releases

 

Folklore Machine Embroidery Designs

Released on the 25th June 2019

 

 Folklore Machine Embroidery Designs by StitchingArt

  

6 designs included in the Folklore machine embroidery design set.

The Folklore design is suitable for a 6 x 10 inch or 240mm x 150mm hoop.

The Folklore design is available in DST, EMB, EXP, HUS, JEF, PES, VIP, VP3 and XXX.

The colour chart is included in the design set

As I am now digitizing with Wilcom embroidery software (which is a commercial software) we are unable to convert files to ART format. Bernina embroidery machines will now need to purchase designs in EMB or EXP format. Sorry for the inconvenience.

View the Folklore Machine Embroidery Designs

Mayil Machine Embroidery Designs

 
Mayil Machine Embroidery Designs

 Released on the 28th May 2019

6 designs included in the Mayil machine embroidery design set.

The Mayil design is suitable for a 14 x 8, 14 x 7 or 360mm x 200mm, 360mm x 150mm hoop.

The Mayil design is available in DST, EMB, EXP, HUS, JEF, PES, VIP, VP3 and XXX.

The colour chart is included in the design set

As I am now digitizing with Wilcom embroidery software (which is a commercial software) we are unable to convert files to ART format. Bernina embroidery machines will now need to purchase designs in EMB or EXP format. Sorry for the inconvenience.

View the Mayil Machine Embroidery Designs

 

springoflife4

 

Spring of Life Machine Embroidery Designs

 Released on the 27th April 2019

9 designs included in the Spring of Life machine embroidery design set.

The Spring of Life design is suitable for a 5 x 7, 6 x 10, 8 x 12 inch or 180mm x 130mm, 240mm x 150mm and 360mm x 200mm hoop.

The Spring of Life design is available in DST, EMB, EXP, HUS, JEF, PES, VIP, VP3 and XXX.

The colour chart and instructions are included in the design set

As I am now digitizing with Wilcom embroidery software (which is a commercial software) we are unable to convert files to ART format. Bernina embroidery machines will now need to purchase designs in EMB or EXP format. Sorry for the inconvenience.

 View the Spring of Life Machine Embroidery Designs

 

 

Wild and Free Machine Embroidery Designs

 

Wild and Free Machine Embroidery Designs

 Released on the 2nd February 2019

6 designs included in the Wild and Free machine embroidery design set.

The Wild and Free design is suitable for a 6 x 10 inch or 240mm x 150mm hoop.

The Wild and Free design is available in DST, EMB, EXP, HUS, JEF, PES, VIP, VP3 and XXX.

The colour chart and instructions are included in the design set

As I am now digitizing with Wilcom embroidery software (which is a commercial software) we are unable to convert files to ART format. Bernina embroidery machines will now need to purchase designs in EMB or EXP format. Sorry for the inconvenience.

 View the Wild and Free Machine Embroidery Designs