![]() |
|
![]() |
Select and stitch out the designs from each of the sets I selected 30 designs to make this quilt Once you have stitched all the designs out arrange how you would like the designs as seen in the photo above and below |
|
|
|
|
![]() |
Cut away excess fabric around the satin stitch border of each square, as shown in the photo to the left |
|
|
![]() |
On the back of each design square I would spray glue so as to keep the designs in place. This I would do one line at a time. |
|
|
![]() |
Stitch each square down onto the backing fabric using your zig zag stitch, as shown to the left. |
|
|
![]() |
Then once I had finished stitching the row onto the backing fabric, I would then stitch the decorative stitch border track down, as seen in the photos above, below and to the left. |
|
|
On the vertical I stitched the decorative stitched border. As seen in the photo below | |
|
|
![]() |
1st and 2nd rows of the Tiny Treasures Quilt |
|
|
![]() |
3rd and 4th rows of the Tiny Treasures Quilt |
|
|
![]() |
3rd and 4th rows of the Tiny Treasures Quilt |
|
|
Instructions for the Decorative Stitch Border If you do not want to do the decorative stitch border you could use fabric for the tracks on the quilt |
|
|
|
![]() |
|
|
|
Cut out a length of fabric longer than the quilt 5.5cm in or 2.5 inches in width Iron a crease vertical down the centre of the fabric, this give you a clean line to stitch |
|
|
|
![]() |
Using the crease you just ironed down the centre of the fabric, stich a satin stitch Length .35 Width 3.0 I used a mauve thread |
|
|
![]() |
On both sides of the satin stitch (mauve thread) stich a triple straight stitch in a green thread |
|
|
![]() |
On both sides of the triple straight stitch in a cream thread a type of zig zag stitch Lenth .60 Width .45 |
|
|
![]() |
On both sides of the above stitch. Stich a satin stitch in a cream thread, Length .35 Width 4.5 |
|
|
![]() |
Over the top of the mauve satin stitch. Stitch the flower in a medium pink colour Lenth 10 Width 6.0 In the centre of the flower stitch the round satin stitch in a darker pink Lenth 3.0 Width .30 |
|
|
![]() |
Machine Embroidery Designs
Latest Releases
Folklore Machine Embroidery Designs
Released on the 25th June 2019
6 designs included in the Folklore machine embroidery design set.
The Folklore design is suitable for a 6 x 10 inch or 240mm x 150mm hoop.
The Folklore design is available in DST, EMB, EXP, HUS, JEF, PES, VIP, VP3 and XXX.
The colour chart is included in the design set
As I am now digitizing with Wilcom embroidery software (which is a commercial software) we are unable to convert files to ART format. Bernina embroidery machines will now need to purchase designs in EMB or EXP format. Sorry for the inconvenience.