0

 

 

Notions

 

  • 90 x 90 cm or 36 x 36 inches of background fabric
  • 2 metres or 6 ft of fabric for the stitch outs
  • 2 metres or 6ft of thin wadding
  • 3 spools of Victory Rayon variegated thread 40 weight 1,000 meters (I bought 2 spools a few years ago and for life of me I could not remember where I bought the spools from or the name of the thread. I took a photo of a spool and put the photo up on Facebook. Thankfully Dale Rollerson of Thread Studio http://www.thethreadstudio.com recognised the thread from her at craft exhibition. The thread I bought is no longer available but you can use a similar one “Barrier Reef” variegated thread. I only bought 2 spools so I was really on the edge with just 2 spools. Once I finished all the stitch outs all I had was about 1 metre left on the spool... way too close!!)
  • 90 x 90 cm or 36 x 36 inches of backing fabric for the wall hanging
  • Hot glue

 

Stitch out the following designs:

  • 3 x Timeless_01
  • 3 x Timeless_02
  • 6 x Timeless_03
  • 3 x Timeless_04
  • 3 x Timeless_05
  • 3 x Timeless_06
  • 4 x Timeless_07
  • 2 x Timeless_08
  • 4 of Timeless_09
  • 2 x Timeless_10
  • 2 x Timeless_11
  • 12 x Timeless_12
  • 2 x Timeless_13
  • 2 x Timeless_14

 

1

 

Showing you the layout of each design on the wall hanging

 

2

 

Mark the centre of the background fabric

 

3

 

Centre of the fabric market

 

4

 

Start out by either pinning or gluing the centre panel down which is one the “Timeless_04” that you have stitched out then on either side of “Timeless_04”put “Timeless_03”

 

5

 

Showing the first layer of all the panels lightly hot glued down to the background fabric

 

6

 

Showing the start of the next layer of panels

 

7

 

Showing the next layer of panels


Once you have placed all the designs onto your background fabric zigzag stitch each of the panels down

 

8

 

If you wish you can put a border around the edge of the wall hanging and stitch over the outside satin stitch border using a “Feather Stitch” in your decorative stitches on your machine this helps blend the outside panels with the fabric border

 

9

 

Showing you the feather stitch blending with the border fabric

  

Machine Embroidery Designs

 Latest Releases

 

Folklore Machine Embroidery Designs

Released on the 25th June 2019

 

 Folklore Machine Embroidery Designs by StitchingArt

  

6 designs included in the Folklore machine embroidery design set.

The Folklore design is suitable for a 6 x 10 inch or 240mm x 150mm hoop.

The Folklore design is available in DST, EMB, EXP, HUS, JEF, PES, VIP, VP3 and XXX.

The colour chart is included in the design set

As I am now digitizing with Wilcom embroidery software (which is a commercial software) we are unable to convert files to ART format. Bernina embroidery machines will now need to purchase designs in EMB or EXP format. Sorry for the inconvenience.

View the Folklore Machine Embroidery Designs

Mayil Machine Embroidery Designs

 
Mayil Machine Embroidery Designs

 Released on the 28th May 2019

6 designs included in the Mayil machine embroidery design set.

The Mayil design is suitable for a 14 x 8, 14 x 7 or 360mm x 200mm, 360mm x 150mm hoop.

The Mayil design is available in DST, EMB, EXP, HUS, JEF, PES, VIP, VP3 and XXX.

The colour chart is included in the design set

As I am now digitizing with Wilcom embroidery software (which is a commercial software) we are unable to convert files to ART format. Bernina embroidery machines will now need to purchase designs in EMB or EXP format. Sorry for the inconvenience.

View the Mayil Machine Embroidery Designs

 

springoflife4

 

Spring of Life Machine Embroidery Designs

 Released on the 27th April 2019

9 designs included in the Spring of Life machine embroidery design set.

The Spring of Life design is suitable for a 5 x 7, 6 x 10, 8 x 12 inch or 180mm x 130mm, 240mm x 150mm and 360mm x 200mm hoop.

The Spring of Life design is available in DST, EMB, EXP, HUS, JEF, PES, VIP, VP3 and XXX.

The colour chart and instructions are included in the design set

As I am now digitizing with Wilcom embroidery software (which is a commercial software) we are unable to convert files to ART format. Bernina embroidery machines will now need to purchase designs in EMB or EXP format. Sorry for the inconvenience.

 View the Spring of Life Machine Embroidery Designs

 

 

Wild and Free Machine Embroidery Designs

 

Wild and Free Machine Embroidery Designs

 Released on the 2nd February 2019

6 designs included in the Wild and Free machine embroidery design set.

The Wild and Free design is suitable for a 6 x 10 inch or 240mm x 150mm hoop.

The Wild and Free design is available in DST, EMB, EXP, HUS, JEF, PES, VIP, VP3 and XXX.

The colour chart and instructions are included in the design set

As I am now digitizing with Wilcom embroidery software (which is a commercial software) we are unable to convert files to ART format. Bernina embroidery machines will now need to purchase designs in EMB or EXP format. Sorry for the inconvenience.

 View the Wild and Free Machine Embroidery Designs